Skip Navigation
  1. BlackBerry Docs
  2. BlackBerry AtHoc
  3. BlackBerry AtHoc Integrations
  4. Eaton Waves Giant Voice System Installation and Configuration Guide
  5. Configure the Eaton WAVES device
  6. Create and publish an Eaton WAVES Giant Voice alert template

Create and publish an Eaton WAVES Giant Voice alert template

Prerequisites
  • Before you start sending test alerts through Eaton WAVES Giant Voice, consider the impact it has on everyone within hearing distance of the poles you are using during the test.
  • This process assumes that the IIM is not configured to download data from the BlackBerry AtHoc management server and is not connected to the Giant Voice equipment.
  • Consult with your POC about the acceptable content of the test alert. For example, the word "test" should appear at, or very near to, the start of the broadcast message.
  • Although the initial use of this template is to test the data creation process, this template can be used during the audio tuning phase after the IIM and Giant Voice hardware are connected.
To confirm that the Eaton WAVES Giant Voice device is installed correctly on the BlackBerry AtHoc management system, create a template.
  1. Log in to the BlackBerry AtHoc management system as an administrator.
  2. Click 
    Alerts
     > 
    Alert Templates
    .
  3. Click 
    New
    .
  4. On the 
    New Template
     screen, in the 
    Alert Template
     section, enter a template name and description.
  5. Select a folder from the 
    Folder
     list.
  6. Select 
    Available for quick publish
     or 
    Available for mobile publishing
    .
  7. In the 
    Content
     section, enter the title and content of the alert.
  8. In the 
    Mass Devices
     section, select the 
    Eaton WAVES Activation
     check box.
  9. From the list, select one or more 
    Mass Alert Endpoints
    .
  10. Click 
    Options
     in the top right corner of the 
    Mass Device
     section.
  11. On the 
    Mass Devices Options
     screen, make any required changes. By default, the following options are selected:
    • Message priority
      : not selected
    • For Voice Content, Text to Speech
      : Alert title and body
    • Play Alert Content
      : 1 time
    • LED Readerboard Content
      : None
  12. Click 
    Apply
    .
  13. In the 
    Schedule
     section, change the 
    Alert Duration
     to 15 minutes.
  14. Click 
    Save
    .
  15. Click  (Globe) icon to go to the Home page.
  16. In the 
    Quick Publish
     section, find the 
    Alert Template
     you just created.
  17. Click 
    Review and Publish
    .
  18. Review the settings and selections.
  19. Click 
    Publish
    .