Skip Navigation
  1. BlackBerry Docs
  2. BlackBerry AtHoc
  3. BlackBerry AtHoc Integrations
  4. American Signal Giant Voice System Installation and Configuration Guide
  5. Configure IIM IP connectivity
  6. Swap the CSC960 encoder
  7. Swap from a legacy CSC960 to new CSC960

Swap from a legacy CSC960 to new CSC960

  1. Open the 
    .REM file
     saved at 
    C:\WINAPPS\ASC2\Data\REM
     with Notepad or with the CompuLert Diagnostic application.
  2. Exit the 
    CompuLert
     software and restart it.
  3. Observe and note down the Central number, displayed on the screen when the software starts.
  4. Turn off the associated radio and legacy CSC960 and disconnect them from power.
  5. Swap all of the cables from the old CSC960 to the new CSC960.
  6. Restore power to both the radio and new CSC960.
  7. Exit the CompuLert software and restart it.
  8. Observe the Central number that comes up on the screen.
    It should match the number that was shown for the old unit.
  9. Optionally, if they do not match, use the CompuLert Diagnostic tool to update the Central address in the new unit.